Dishwasher Repairs
Water sitting in the bottom, a puddle under the door, or plates coming out dirtier than they went in. Whatever your dishwasher's doing, we can usually fix it in one visit.

Dishwasher repairs in your home
A lot of dishwasher faults start small. A filter that hasn't been cleaned in a while, a spray arm full of limescale, a drain hose with a kink in it. Left alone, they put strain on the pump and heater, and that's when it stops working altogether.
We repair freestanding and integrated dishwashers from all the main brands. For integrated models, let us know when you book, as the engineer may need to slide it out of the cabinet. You'll get the price before any work starts.
Pumps, inlet valves, door seals and heating elements are the parts that fail most often. The engineer carries the common ones, so a lot of dishwasher repairs are done in a single visit.
Before you call, try this
A few of the calls we get turn out to be something you can sort yourself in five minutes. It’s worth a quick look first.
- Take out the filter at the bottom of the tub and rinse it under the tap. Most draining problems and dirty dishes start here.
- Check the spray arms spin freely and the little holes aren't blocked with food or limescale.
- If it won't fill, make sure the tap under the sink is on and the inlet hose isn't kinked.
- If the kitchen sink is slow to drain as well, the blockage may be in the sink waste rather than the dishwasher.
- Write down any error code or pattern of flashing lights.
Common dishwasher faults
What usually causes them, and what we do about it.
Not draining
Standing water in the base is nearly always a blocked filter, a kinked drain hose or a failed drain pump. We clear it, then test the pump.
Leaking
Usually the door seal, a cracked spray arm, the inlet valve or a damaged sump. We trace exactly where the water is getting out before replacing anything.
Dishes still dirty
Blocked spray arms, a weak wash pump, low water fill or a heater fault. We check each one and fix whichever is causing it.
Not heating or drying
Cold washes and wet dishes point to the heating element, thermostat or temperature sensor. We test the heating circuit and replace the failed part.
Won't fill with water
The inlet valve, the supply hose or the float switch is usually to blame. Check the tap behind the machine is on before you call us.
Won't start or shows a code
A faulty door switch, a wiring problem or the control board can stop a programme starting. We read the code and test from there.
Repair or replace?
Dishwashers are nearly always worth repairing unless the tub itself is cracked or rusted through. A new pump or inlet valve costs a fraction of a new machine.
That's especially true for integrated models. A new integrated dishwasher has to match the size of the gap and fit your existing door panel, and that doesn't always work out. Repairing the one you've got avoids all of that.
Keeping it running
Water across London and Surrey is hard, so keep the salt and rinse aid topped up. Without them, limescale builds up on the heater and in the spray arms, and that causes a lot of faults.
Scrape plates into the bin rather than rinsing them, clean the filter every week or two, and run an empty hot cycle with a dishwasher cleaner once a month.
What happens when you book
Book online or ring 020 3633 0084 and tell us the brand, model and what’s going wrong. We’ll give you a time slot, and the engineer will call before they arrive.
Once they’ve found the fault, they’ll tell you what it is and what it’ll cost. If you’re happy, they fix it there and then, or order the part and come back if it’s not one we carry. Before leaving they test the appliance with you, and about a week later we’ll check in to make sure it’s still working.
Brands we repair











Dishwasher repair questions
Can’t see your question? Call 07555 810737 and ask.
How much does a dishwasher repair cost?
Repairs start from £78. The final price depends on the fault and the part, and you'll know it before we start.
How soon can you come out?
Usually within 24 to 48 hours of booking, and sometimes the same day. Call 07555 810737 to check today's slots.
My dishwasher is leaking. Can I still use it?
Best not to. Turn off the water at the isolation valve and leave it until an engineer has had a look.
Why are my dishes still dirty after a wash?
Most of the time it's a blocked filter or spray arms. Take the filter out and rinse it. If that doesn't help, it may be low water fill or a heating fault, which we can find.
Do you repair integrated dishwashers?
Yes. We repair freestanding and integrated models from Bosch, Miele, Siemens, Neff, AEG, Beko, Hotpoint and the rest.
Is there a call-out fee?
Yes, a call-out or diagnostic fee applies to every visit. The engineer explains the fault and the repair cost before starting.
Is the repair guaranteed?
Yes. We use genuine or equivalent-quality parts, and our workmanship is guaranteed for 30 days on the same reported fault.
Is it worth repairing my dishwasher?
Usually. Pumps, inlet valves, door seals and heating elements cost much less than a new dishwasher, especially an integrated one that needs fitting.
Get your dishwasher looked at
Call or book online. We’ll find you a slot, usually within a day or two.