Read our Google reviews

info@authenticappliancerepairs.com Centurion House, London Road, Staines-upon-Thames TW18 4AX 020 3633 0084

Tumble Dryer Repairs

Clothes still damp after two cycles? Drum not turning, or a noise like a bag of spanners? We repair vented, condenser and heat pump tumble dryers across London and Surrey.

Row of tumble dryers

Tumble dryer repairs in your home

Tumble dryers work hard and the same few parts wear out. Drive belts snap, heating elements burn out, thermal fuses blow, and the rollers and bearings that hold the drum start to squeal. None of these mean you need a new dryer.

Tell us the make and model when you book, and whether it's vented or condenser. The engineer will bring the parts that usually fail, find the fault and give you the price before starting. A dryer that's overheating or smells of burning should be switched off and left until it's been looked at.

Heat pump dryers are a bit different. They run at a lower temperature and naturally take longer, so a long cycle isn't always a fault. If yours is a heat pump model, tell us when you book.

Before you call, try this

A few of the calls we get turn out to be something you can sort yourself in five minutes. It’s worth a quick look first.

  1. Clean the lint filter. On a condenser dryer, take out the condenser unit and rinse it under the tap.
  2. Empty the water tank, even if you think it's not full.
  3. Check the vent hose isn't crushed or kinked behind the machine.
  4. Make sure the door shuts firmly. A worn door catch can stop the dryer starting.
  5. If it smells of burning or feels hotter than usual, switch it off at the wall and don't use it until it's been checked.

Common tumble dryer faults

What usually causes them, and what we do about it.

Not heating

A dryer that turns but stays cold usually has a failed heating element, thermal fuse or thermostat. We test the heating circuit and replace whatever has failed.

Drum not turning

If you can hear the motor but the drum doesn't move, the belt has nearly always snapped. If there's no motor noise at all, it may be the capacitor.

Noisy or grinding

Squeaking, thumping or grinding usually comes from worn drum bearings, rollers, the jockey pulley or the drive shaft.

Takes too long to dry

Often a blocked filter, condenser or vent hose. Sometimes it's the moisture sensor. We clean and test the airflow and sensors.

Stops mid-cycle or won't start

A faulty door switch, an overheating cut-out or a control board fault can stop the dryer starting or switch it off part way through.

Water tank problems

On condenser dryers, a blocked pump or faulty float switch can stop water reaching the tank, or keep the 'empty water' light on.

Repair or replace?

Most tumble dryer faults are worth repairing. Belts, heating elements, thermal fuses and rollers are cheap parts, and replacing them gives a dryer years more life.

It's a closer call when the motor or main control board has failed on an older, cheaper dryer. The engineer will give you the price and let you decide.

Keeping it safe

Lint is the main fire risk with tumble dryers. Clean the filter after every load, rinse the condenser every few weeks, and keep the area around the dryer clear.

Don't leave a dryer running when you go out or go to bed. If your model has ever had a safety recall, check it's been dealt with. You can look it up on the manufacturer's website using the model number.

What happens when you book

Book online or ring 020 3633 0084 and tell us the brand, model and what’s going wrong. We’ll give you a time slot, and the engineer will call before they arrive.

Once they’ve found the fault, they’ll tell you what it is and what it’ll cost. If you’re happy, they fix it there and then, or order the part and come back if it’s not one we carry. Before leaving they test the appliance with you, and about a week later we’ll check in to make sure it’s still working.

Brands we repair

SamsungNeffMieleLGDaewooHotpointZanussiWhirlpoolSiemensBekoAEGBosch

Tumble dryer repair questions

Can’t see your question? Call 07555 810737 and ask.

How much does a tumble dryer repair cost?

Repairs start from £80. The engineer finds the fault and tells you the full price before starting.

How soon can you come out?

Usually within 24 to 48 hours of booking, and sometimes the same day if you call.

My tumble dryer turns but doesn't heat. Can you fix it?

Yes. It's usually the heating element, thermal fuse or a thermostat, and we can test and replace them on the spot.

Which types of tumble dryer do you repair?

Vented, condenser and heat pump dryers from all the main brands, including Bosch, Hotpoint, Beko, Indesit, Samsung, LG, Siemens and Whirlpool.

How do I keep my tumble dryer safe?

Clean the lint filter after every load, empty the water tank on a condenser dryer, keep the vent hose free of kinks, and don't leave it running when you go out or go to bed.

Is there a call-out fee?

Yes, a call-out or diagnostic fee applies to every visit. You'll know the repair cost before any work starts.

Is the repair guaranteed?

Yes. We use genuine or equivalent-quality parts, and our workmanship is guaranteed for 30 days on the same reported fault.

Is it worth repairing my tumble dryer?

Usually. Belts, elements, thermal fuses and bearings cost much less than a new dryer. If it isn't worth it, we'll tell you.

Get your tumble dryer looked at

Call or book online. We’ll find you a slot, usually within a day or two.